D-Link DGS-3700 Series Reference Manual page 310

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config port dot1v
Restrictions
Example usage:
The example is to assign VLAN marketing-1 for untaged IPv6 packet ingress from port 3
To configure the group ID 1 on port 3 to be associated with VLAN marketing-1:
DGS-3700-12:5#config port dot1v ports 3 add protocol_group group_id 1 vlan marketing_1
Command: config port dot1v ports 3 add protocol_group group_id 1 vlan marketing_1
Success.
DGS-3700-12:5#
show port dot1v
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
The example display the protocol VLAN information for ports 1-2:
DGS-3700-12:5#show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port : 1
Protocol Group ID
-----------------
1
2
3
4
Port : 2
Protocol Group ID
-----------------
1
2
3
4
Total Entries: 2
DGS-3700-12:5#
vlan − Vlan that is to be associated with this protocol group on this port.
vlan_id − Specifies the VLAN id.
priority − Specifies the priority to be associated with the packet which has been
classified to the specified vlan by the protocol.
Only Administrator and Operator-level users can issue this command.
Display the VLAN to be associated with untagged packet ingressed from a port based
on the protocol group.
show port dot1v{ ports <portlist>}
This command is used to display the VLAN to be associated with untagged packet
ingressed from a port based on the protocol group.
portlist − Specifies a range of ports to apply this command.
None.
VLAN Name
----------------
default
vlan_2
vlan_3
vlan_4
VLAN Name
------------
vlan_2
vlan_3
vlan_4
vlan_5
Protocol Priority
-----------------
-
-
-
-
Protocol Priority
-----------------
-
-
-
-
Page | 310