D-Link DGS-3700 Series Reference Manual page 479

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show wac ports 1-3
Command: show wac ports 1-3
Port State
------- --------
1 Disabled
2 Disabled
3 Disabled
DGS-3700-12:5#
show wac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show Web authentication user accounts:
DGS-3700-12:5#show wac user
Command: show wac user
Username Password
--------- ----------
123 *****
Total Entries : 1
DGS-3700-12:5#
show wac auth_state ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the WAC authentication status:
Aging Time
(Minutes)
------------
1440
1440
1440
This command is used to display a WAC local user.
show wac user
This command is used to display WAC user accounts.
None.
None.
VID
----------
1000
This command is used to display the WAC authentication state.
show wac auth_state ports {<portlist> } {authenticated | authenticating | blocked}
This command is used to display the authentication state for ports.
<portlist> - Specify the list of ports whose WAC authentication state will be
displayed.
authenticated - Specifies the ports' users whose WAC authentication state are
authenticated.
authenticating - Specifies the ports's users whose WAC authentication state are
authenticating.
blocked - Specifies the ports' users whose WAC authentication state are blocked.
None.
Idle Time
(Minutes)
----------
Infinite
Infinite
Infinite
Page | 479
Block Time
(Seconds)
-----------
60
60
60