D-Link DGS-3700 Series Reference Manual page 111

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show packet ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the packets analysis for port 2:
DGS-3700-12:5#show packet port 2
Command: show packet port 2
Port Number : 2
==================================================================
Frame Size/Type
---------------
64
65-127
128-255
256-511
512-1023
1024-1518
Unicast RX
Multicast RX
Broadcast RX
Frame Type
---------------
RX Bytes
RX Frames
TX Bytes
TX Frames
DGS-3700-12:5#
show error ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the errors of the port 3:
Used to display statistics about the packets sent and received by the Switch.
show packet ports <portlist>
This command is used to display statistics about packets sent and received by ports
specified in the <portlist>.
<portlist> − Specifies a port or range of ports to be displayed.
None.
Frame Counts
----------------------
0
0
0
0
0
0
0
0
0
Total
----------------------
0
0
0
0
Used to display the error statistics for a range of ports.
show error ports <portlist>
This command will display all of the packet error statistics collected and logged by
the Switch for a given port list.
<portlist> − Specifies a port or range of ports to be displayed.
None.
Frames/sec
-----------
0
0
0
0
0
0
0
0
0
Total/sec
-----------
0
0
0
0
Page | 111