D-Link DGS-3700 Series Reference Manual page 155

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example usage:
To prevent SNMP traps from being sent from the Switch:
DGS-3700-12:5#disable snmp traps
Command: disable snmp traps
Success.
DGS-3700-12:5#
disable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the SNMP authentication trap support:
DGS-3700-12:5#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3700-12:5#
config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "MIS Department II":
DGS-3700-12:5#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DGS-3700-12:5#
config snmp system_location
Purpose
Syntax
Description
Used to disable SNMP authentication trap support.
disable snmp authenticate_traps
This command is used to disable SNMP authentication support on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to enter the name of a contact person who is responsible for the Switch.
config snmp system_contact <sw_contact>
This command is used to enter the name and/or other information to identify a contact
person who is responsible for the Switch. A maximum of 255 character can be
used.
<sw_contact> − A maximum of 255 characters is allowed. A null string is accepted if
there is no contact.
Only Administrator and Operator-level users can issue this command.
Used to enter a description of the location of the Switch.
config snmp system_location <sw_location>
This command is used to enter a description of the location of the Switch. A maximum
Page | 155