Show Hol_Prevention; Config Mgmt_Pkt_Priority - D-Link DGS-3700 Series Reference Manual

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
disable hol_prevention
Parameters
Restrictions
Example usage:
To disable HOL prevention:
DGS-3700-12:5#disable hol_prevention
Command: disable hol_prevention
Success.
DGS-3700-12:5#

show hol_prevention

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display HOL prevention:
DGS-3700-12:5#show hol_prevention
Command: show hol_prevention
Device HOL Prevention State: Enabled
DGS-3700-12:5#

config mgmt_pkt_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config priority of managment packet setting:
DGS-3700-12:5#config mgmt_pkt_priority 3
Command: config mgmt_pkt_priority 3
Success.
DGS-3700-12:5#
show mgmt_pkt_priority
Purpose
None.
Only Administrator and Operator-level users can issue this command.
Used to show the HOL prevention state.
show hol_prevention
This command displays the HOL prevention state.
None.
None.
Used to configure the priority of managment packet.
config mgmt_pkt_priority [default |<priority 0-7>]
This command is used to configure the priority of managment packet.
default− Specifies to use the original management packet priority.
<priority 0-7> - Specifes the priority of packets, the range is 0-7. 7 is highest
priority.
Only Administrator level users can issue this command.
Used to display current priority of management packet.
Page | 352