D-Link DGS-3700 Series Reference Manual page 200

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config igmp_snooping multicast_vlan_group_profile
Restrictions
Example usage:
To add 233.1.1.1 to 266.1.1.1 to IGMP multicast VLAN group profile "p1":
DGS-3700-12:5#config igmp_snooping multicast_vlan_group_profile p1 add 225.1.1.1-
226.1.1.1
Command: config igmp_snooping multicast_vlan_group_profile p1 add 225.1.1.1-226.1.1.1
Success.
DGS-3700-12:5#
delete igmp_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IGMP multicast VLAN group profile "p1":
DGS-3700-12:5#delete igmp_snooping multicast_vlan_group_profile profile_name p1
Command: delete igmp_snooping multicast_vlan_group_profile profile_name p1
Success.
DGS-3700-12:5#
show igmp_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IGMP Multicast VLAN group profile "p1":
can be continuous single multicast addresses, such as 225.1.1.1, 225.1.1.3,
225.1.1.8, or a multicast address range, such as 225.1.1.1-225.2.2.2, or both of
them, such as 225.1.1.1, 225.1.1.18-225.1.1.20
Only Administrator and Operator-level users can issue this command.
Used to delete an IGMP Multicast VLAN group profile on the switch.
delete igmp_snooping multicast_vlan_group_profile [profile_name
<profile_name 1-32> |all]
This command deletes an IGMP Multicast VLAN group profile on the switch.
<profile_name 32> − Specifies the IGMP Multicast VLAN profile name, max length
is 32.
all – All IGMP Multicast VLAN group profiles will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to view an IGMP Multicast VLAN group profile on the switch.
show igmp_snooping multicast_vlan_group_profile {<profile_name 1-32>}
This command displays an IGMP Multicast VLAN group profile on the switch.
{<profile_name 32>} − Specifies the IGMP Multicast VLAN profile name, max
length is 32. If not specifies, all IGMP Multicast VLAN group profile will be
displayed.
Only Administrator and Operator-level users can issue this command.
Page | 200