Each Command Is Listed, In Detail, In The Following Sections - D-Link DGS-3700 Series Reference Manual

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
C
OMMAND
delete authen server_host
show authen server_host
config authen parameter
response_timeout
config authen parameter
attempt
show authen parameter
enable admin
config admin local_enable

Each command is listed, in detail, in the following sections.

enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DGS-3700-12:5#enable authen_policy
Command: enable authen_policy
Success.
DGS-3700-12:5#
disable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the system access authentication policy:
P
ARAMETERS
1-20>}
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
<int 0-255>
<int 1-255>
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication policy for users
trying to access the Switch. When enabled, the device will check the method list
and choose a technique for user authentication upon login.
None.
Only Administrator-level users can issue this command.
Used to disable system access authentication policy.
disable authen_policy
This command will disable the administrator-defined authentication policy for users
trying to access the Switch. When disabled, the Switch will access the local user
account database for username and password verification. In addition, the Switch
will now accept the local enable password as the authentication for normal users
attempting to access administrator level privileges.
None.
Only Administrator-level users can issue this command.
Page | 406