D-Link DGS-3700 Series Reference Manual page 144

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DGS-3700-12:5#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink":
DGS-3700-12:5#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3700-12:5#
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
Used to remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
This command is used to remove a previously defined SNMP community string from
the Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is used
to identify members of an SNMP community. This string is used like a password
to give remote SNMP managers access to MIB objects in the Switch's SNMP
agent.
Only Administrator-level users can issue this command.
Used to display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
This command is used to display SNMP community strings that are configured on the
Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is used
to identify members of an SNMP community. This string is used like a password
to give remote SNMP managers access to MIB objects in the Switch's SNMP
agent.
None.
Page | 144