D-Link DGS-3700 Series Reference Manual page 544

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
-----------------------------------------------------------
Information OAMPDU Tx
Information OAMPDU Rx
Unique Event Notification OAMPDU Tx
Unique Event Notification OAMPDU Rx
Duplicate Event Notification OAMPDU Tx: 0
Duplicate Event Notification OAMPDU Rx: 0
Loopback Control OAMPDU Tx
Loopback Control OAMPDU Rx
Variable Request OAMPDU Tx
Variable Request OAMPDU Rx
Variable Response OAMPDU Tx
Variable Response OAMPDU Rx
Organization Specific OAMPDUs Tx
Organization Specific OAMPDUs Rx
Unsupported OAMPDU Tx
Unsupported OAMPDU Rx
Frames Lost Due To OAM
DGS-3700-12:5#
Show Ethernet OAM event_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show port 1 external OAM event:
Used to show the Ethernet OAM event log.
show ethernet_oam {<portlist>} event_log {index <value_list> }
This command is used to show ports Ethernet OAM event log information. The switch
can buffer 1000 event logs. The event log is different from sys-log. It provides
more detailed information than sys-log. Each OAM event will be recorded in both
OAM event log and syslog.
You can specify an index to show a range of events.
portlist – Specifies a range of ports to display.
index – Specifies an index range to display.
None.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Page | 544