D-Link DGS-3700 Series Reference Manual page 151

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
create trusted_host
Syntax
Description
Parameters
Restrictions
Example usage:
To create the trusted host:
DGS-3700-12:5#create trusted_host 10.62.32.1
Command: create trusted_host 10.62.32.1
Success.
config trusted_host
Purpose
Syntax
Description
Parameters
create trusted_host [<ipaddr> | <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr> ] {snmp | telnet | ssh | http | https | ping}
This command is used to create the trusted host. The Switch allows users to specify up
to four IP addresses that are allowed to manage the Switch via in-band SNMP or
TELNET based management software. These IP addresses must be members of the
Management VLAN. If no IP addresses are specified, then there is nothing to
prevent any IP address from accessing the Switch, provided the user knows the
Username and Password.
<ipaddr> - Specify the IP address of the trusted host.
<ipv6addr> - Specify the IPv6 address of the trusted host.
network - Specify the network address of the trusted network. The form of network
address is xxx.xxx.xxx.xxx/y.
ipv6_prefix - Specify the IPv6 network address of the trusted network.
snmp - Specify the trusted host for SNMP.
telnet - Specify the trusted host for Telnet.
ssh - Specify the trusted host for SSH.
http - Specify the trusted host for HTTP.
https - Specify the trusted host for HTTPs.
ping - Specify the trusted host for Ping.
Only Administrator and Operator-level users can issue this command.
To configure the access interfaces for the trusted host.
config trusted_host [<ipaddr> | <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr> ] [add | delete] [{snmp | telnet | ssh | http |
https | ping} | all]
This command is used to configure the access interfaces for the trusted host.
<ipaddr> - Specify the IP address of the trusted host.
<ipv6addr> - Specify the IPv6 address of the trusted host.
network - Specify the network address of the trusted network. The form of network
address is xxx.xxx.xxx.xxx/y.
ipv6_prefix - Specify the IPv6 network address of the trusted network.
add - Add interfaces for a trusted host.
delete - Delete interfaces for a trusted host.
snmp - Specify the trusted host for SNMP.
telnet - Specify the trusted host for Telnet.
ssh - Specify the trusted host for SSH.
http - Specify the trusted host for HTTP.
https - Specify the trusted host for HTTPs.
ping - Specify the trusted host for Ping.
all - Specify the trusted host for all applications.
Page | 151