D-Link DGS-3700 Series Reference Manual page 220

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example usage:
To display the BPDU tunnelling state of all ports:
DGS-3700-12:5#show bpdu_tunnel
Command: show bpdu_tunnel
BPDU Tunnel : Disabled
STP Tunnel Multicast Address : 01-05-5D-00-00-00
STP Tunnel Port : 1-4
GVRP Tunnel Multicast Address : 01-05-5D-00-00-21
GVRP Tunnel Port :
Uplink Port :
DGS-3700-12:5#
enable bpdu_tunnel
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable bpdu_tunnel:
DGS-3700-12:5#enable bpdu_tunnel
Command: enable bpdu_tunnel
Success.
DGS-3700-12:5#
disable bpdu_tunnel
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable bpdu_tunnel:
DGS-3700-12:5#disable bpdu_tunnel
Command: disable bpdu_tunnel
Success.
DGS-3700-12:5#
Used to enable the BPDU Tunnelling function.
enable bpdu_tunnel
This command is used to enable the BPDU Tunnelling function.
By default, the BPDU Tunneling is disabled.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the BPDU Tunnelling function.
disable bpdu_tunnel
This command is used to disable the BPDU Tunneling function.
None.
Only Administrator and Operator-level users can issue this command.
Page | 220