D-Link DGS-3700 Series Reference Manual page 77

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DGS-3700-12:5#
To change the hold time of the discovery protocol:
DGS-3700-12:5#config sim hold_time 120
Command: config sim hold_time 120
Success.
DGS-3700-12:5#
To transfer the CS (commander) to be a CaS (candidate):
DGS-3700-12:5#config sim candidate
Command: config sim candidate
Success.
DGS-3700-12:5#
To transfer the Switch to be a CS:
DGS-3700-12:5#config sim commander
Command: config sim commander
Success.
DGS-3700-12:5#
To update the name of a group:
DGS-3700-12:5#config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DGS-3700-12:5#
download sim_ms
Purpose
Syntax
Description
Parameters
Used to download firmware or configuration file to an indicated device.
download sim_ms [firmware_from_tftp | configuration_from_tftp] <ipaddr>
<path_filename> {[ members <mslist 1-32> | all]}
This command will download a firmware file or configuration file to a specified
device from a TFTP server.
firmware_from_tftp – Specify this parameter to download firmware to members of a
SIM group.
configuration_from_tftp − Specify this parameter to download a switch configuration
to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or switch on the
Page | 77