D-Link DGS-3700 Series Reference Manual page 418

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server hosts currently set on the Switch:
DGS-3700-12:5#show authen server_host
Command: show authen server_host
IP Address Protocol
----------- --------
10.53.13.94 TACACS
Total Entries : 1
DGS-3700-12:5#
create authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the server group "group_1":
Used to view a user-defined authentication server host.
show authen server_host
This command is used to view user-defined authentication server hosts previously
created on the Switch.
The following parameters are displayed:
IP Address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will include
TACACS, XTACACS, TACACS+ or RADIUS.
Port – The virtual port number on the server host. The default value is 49.
Timeout − The time in seconds the Switch will wait for the server host to reply to an
authentication request.
Retransmit − The value in the retransmit field denotes how many times the device will
resend an authentication request when the TACACS server does not respond. This
field is inoperable for the tacacs+ protocol.
Key − Authentication key to be shared with a configured TACACS+ server only.
None.
Only Administrator-level users can issue this command.
Port Timeout
----- -------
49 5
Used to create a user-defined authentication server group.
create authen server_group {<string 15>}
This command will create an authentication server group. A server group is a
technique used to group TACACS/XTACACS/TACACS+/RADIUS server hosts
into user defined categories for authentication using method lists. The user may
add up to eight authentication server hosts to this group using the config authen
server_group command.
<string 15> − Enter an alphanumeric string of up to 15 characters to define the newly
created server group.
Only Administrator-level users can issue this command.
Retransmit Key
---------- -----
2 No Use
Page | 418