D-Link DGS-3700 Series Reference Manual page 361

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show dscp map dscp_color
Command: show dscp map dscp_color
DSCP to Color Mapping:
Port 1
DSCP 0-63 is mapped to Green
Port 2
DSCP 0-63 is mapped to Green
Port 3
DSCP 0-63 is mapped to Green
Port 4
DSCP 0-63 is mapped to Green
Port 5
DSCP 0-63 is mapped to Green
Port 6
DSCP 0-63 is mapped to Green
Port 7
DSCP 0-63 is mapped to Green
Port 8
DSCP 0-63 is mapped to Green
Port 9
DSCP 0-63 is mapped to Green
Port 10
DSCP 0-63 is mapped to Green
CTRL+C ESC q Quit
config 802.1p map
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This config 802.1p map:
DGS-3700-12:5#config 802.1p map 1-8 1p_color 1 to red
Command: config 802.1p map 1-8 1p_color 1 to red
Success.
DGS-3700-12:5#
show 802.1p map
Purpose Used to display the 802.1p to color mapping
Syntax show 802.1p map 1p_color { <portlist>}
This command is used to display the 802.1p to color mapping
Description
portlist − A range of ports to show.
Parameters
Restrictions None.
SPACE n Next Page
Config mapping of 802.1p to packet's initial color.
config 802.1p map [<portlist>|all] 1p_color [<priority_list] to [green|red |yellow]
This command is used to configure mapping of 802.1p to packet's initial color.
The mapping of 802.1p to color will be used to determine the initial color of the
packet, when the policing function of the packet is color aware and the packet is
802.1p-trusted.
portlist − A range of ports to configure.
priority − Source priority of incoming packets.
color − Mapped color for packet, default value is green
Only Administrator and Operator-level users can issue this command.
ENTER Next Entry a
Page | 361
All