D-Link DGS-3700 Series Reference Manual page 337

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config loopdetect trap
Parameters
Restrictions
Example usage:
To config loop trap both:
DGS-3700-12:5#config loopdetect trap both
Command: config loopdetect trap both
Success.
DGS-3700-12:5#
none – Trap will not be sent for both cases.
loop_detected – Trap is sent when the loop condition is detected.
loop_cleared – Trap is sent when the loop condition is cleared.
both – Trap will be sent for both cases.
Only Administrator and Operator-level users can issue this command.
Page | 337