D-Link DGS-3700 Series Reference Manual page 117

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#clear historical_counters ports all
Command: clear historical_counters ports all
Success.
DGS-3700-12:5#
clear log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:
DGS-3700-12:5#clear log
Command: clear log
Success.
DGS-3700-12:5#
show log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch history log:
DGS-3700-12:5#show log index 1-5
Command: show log index 1-5
Index Date Time
----- ---------- -------- ------------------------------------------------------
5 2000-01-03 18:53:06 Logout through Console (Username: Anonymous)
4 2000-01-03 18:47:22 Successful login through Console (Username: Anonymous)
3 2000-01-03 18:47:18 Port 3 link up, 1000Mbps FULL duplex
2 2000-01-03 18:47:18 Port 7 link up, 100Mbps FULL duplex
1 2000-01-03 18:47:18 System started up
DGS-3700-12:5#
NOTE: For detailed information regarding Log entries that will appear in this window,
please refer to Appendix C at the back of the DGS-3700-12 Layer 2 Gigabit Ethernet
Managed Switch User Manual.
Used to clear the Switch's history log.
clear log
This command is used to clear the Switch's history log.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the switch history log.
show log {index <value_list>}
This command is used to display the contents of the Switch's history log.
−
index <value_list> This parameter specifies the range of log index to show. For
example, show log index 1-5 will display the history log from 1 to 5.
If no parameter is specified, all history log entries will be displayed.
None.
Log Text
Page | 117