D-Link DGS-3700 Series Reference Manual page 145

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name
-------------- -----------
dlink ReadView
private CommunityView
public CommunityView
Total Entries: 3
DGS-3700-12:5#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666":
DGS-3700-12:5#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DGS-3700-12:5#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DGS-3700-12:5#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 800000ab03000102030400
DGS-3700-12:5#
create snmp group
Purpose
Syntax
Access Right
------------
read_write
read_write
read_only
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
This command is used to configure a name for the SNMP engine on the Switch.
<snmp_engineID> − An alphanumeric string that will be used to identify the SNMP
engine on the Switch.
Only Administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
This command is used to display the identification of the SNMP engine on the Switch.
None.
None.
Used to create a new SNMP group, or a table that maps SNMP users to SNMP views.
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]] {read_view <view_name 32> | write_view <view_name 32> |
Page | 145