D-Link DGS-3700 Series Reference Manual page 142

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example usage:
To create an SNMP view:
DGS-3700-12:5#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS-3700-12:5#
delete snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS-3700-12:5#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS-3700-12:5#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
Used to remove an SNMP view entry previously created on the Switch.
delete snmp view <view_name 32> [all | <oid>]
This command is used to remove an SNMP view previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the
SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will be deleted
from the Switch.
Only Administrator-level users can issue this command.
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
This command is used to display an SNMP view previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the
SNMP view that will be displayed.
None.
Page | 142