D-Link DGS-3700 Series Reference Manual page 360

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config dscp map
Restrictions
Example usage:
This config DSCP map:
DGS-3700-12:5#config dscp map 1-8 dscp_priority 1 to 1
Command: config dscp map 1-8 dscp_priority 1 to 1
Success.
DGS-3700-12:5#
show dscp map
Used to display the DSCP map configure parameter.
Purpose
Syntax show dscp map { <portlist> } [dscp_priotity | dscp_dscp | dscp_color] {dscp
Description This command is used to show DSCP trusted portlist and mapped color, priority and
portlist - A range of ports to show. If no parameter is specified, all ports' dscp mapping
Parameters
dscp_priotity - Specifies a list of DSCP value to be mapped to a specific priority.
dscp_dscp - Specifies a list of DSCP value to be mapped to a specific DSCP.
dscp_color - Specifies a list of DSCP value to be mapped to a specific color.
Restrictions None.
Example usage:
This show DSCP map:
dscp_color − Specifies a list of DSCP value to be mapped to a specific color.
color − Specifies the result color of mapping.
Only Administrator and Operator-level users can issue this command.
<dscp_list>}
DSCP.
will be displayed. If project only support global configure, display global
information.
Page | 360