D-Link DGS-3700 Series Reference Manual page 179

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config erps raps_vlan
add - Connect the sub-ring to another ring.
delete - Disconnect the sub-ring from the connected ring.
tc_propagation state – Specifies the state of topology change propagation.
Restrictions
Example usage:
To enable the R-APS
DGS-3700-12:5# config erps raps_vlan 4094 state enable
Command: config erps raps_vlan 4094 state enable
Success.
DGS-3700-12:5#
To set the R-APS west ring port parameter to 5:
DGS-3700-12:5#config erps raps_vlan 4094 ring_port west 5
Command: config erps raps_vlan 4094 ring_port west 5
Success.
DGS-3700-12:5#
To set the R-APS east ring port parameter to 7:
DGS-3700-12:5#config erps raps_vlan 4094 ring_port east 7
Command: config erps raps_vlan 4094 ring_port east 7
Success.
DGS-3700-12:5#
To set the R-APS RPL parameter:
DGS-3700-12:5#config erps raps_vlan 4094 rpl_port west
Command: config erps raps_vlan 4094 rpl_port west
Success.
DGS-3700-12:5#config erps raps_vlan 4094 rpl_owner enable
Command: config erps raps_vlan 4094 rpl_owner enable
Success.
DGS-3700-12:5#
To set the R-APS protected VLAN parameter:
guard_time - Specify the guard time of the R-APS function. The default guard time is
500 milliseconds.
wtr_time - Specify the WTR time of the R-APS function. The range is from 5 to 12
minutes. The default WTR time is 5 minutes.
enable – Enables the topology change propagation.
disable – Disables the topology change propagation.
Only Administrator and Operator-level users can issue this command.
Page | 179