D-Link DGS-3700 Series Reference Manual page 435

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show address_binding dhcp_snoop binding_entry
Command: show address_binding dhcp_snoop binding_entry
LT(Lease Time) ST(Status) - A:Active I:Inactive
IP Address
--------------------------------------- ----------------- ---------- ----- --
10.62.58.35
10.33.53.82
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 50
2001::1
Total Entries : 4
DGS-3700-12:5#
To display DHCP Snooping maximun entry configuration on the specified ports:
DGS-3700-12:5#show address_binding dhcp_snoop max_entry ports 1-12
Command: show address_binding dhcp_snoop max_entry ports 1-12
Port Max Entry
----- -------
1 10
2 10
3 10
4 No Limit
5 No Limit
6 No Limit
7 No Limit
8 No Limit
9 No Limit
10 No Limit
11 No Limit
12 No Limit
DGS-3700-12:5#
config address_binding dhcp_snoop max_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the max number of entries that ports 1 to 3 can learn, up to 10:
Max IPv6 Entry
----------------
10
10
30
50
10
No Limit
No Limit
No Limit
No Limit
No Limit
No Limit
No Limit
Specifies the max number of entries which can be learned by the specified ports.
config address_binding dhcp_snoop max_entry ports [<portlist> | all] limit
[<value 1-50> | no_limit] {ipv6}
This command specifies the max number of entries which can be learned by the
specified ports. By default, per port max entry is no limit.
ports − Specifies the list of ports that you would like to config for the max number of
dhcp-snoop learned entries, which can be learned.
limit − Specifies the max number.
ipv6 - Specifies the configuration is for IPv6 DHCP Snooping.
Only Administrator and Operator-level users can issue this command.
MAC Address
00-0B-5D-05-34-0B 35964
00-20-c3-56-b2-ef 2590
00-00-00-00-03-02 100
Page | 435
LT(sec) Port ST
1 A
2 I
5 I
6 A