D-Link DGS-3700 Series Reference Manual page 342

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
create ipv6route
Restrictions
Example usage:
Create an ipv6 default gateway:
DGS-3700-12:5#create ipv6route default System 3FFE::1 33 primary
Command: create ipv6route default System 3FFE::1 33 primary
Success.
DGS-3700-12:5#
delete ipv6route
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Delete an ipv6 default route:
DGS-3700-12:5#delete ipv6route default
Command: delete ipv6route default
Success.
DGS-3700-12:5#
show ipv6route
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the static IPv6 entries in the routing table:
[primary | backup] – The user may choose between Primary and Backup. If the
Primary Static/Default Route fails, the Backup Route will support the entry.
Only Administrator and Operator-level users can issue this command.
delete an ipv6 default gateway.
delete ipv6route [[default |<ipv6networkaddr>] [<ipif_name 12> <ipv6addr> |
<ipv6addr> ]| all]
This command is used to delete an ipv6 route.
default – Use this parameter to delete an IPv6 default gateway.
<ipv6networkaddr> - Specifies the IPv6 network address used.
<ipif_name 12> – Enter the corresponding ipif name of the IPv6 address.
<ipv6addr> − IPv6 address for the next hop router.
all − This will delete all IPv6 default gateways.
Only Administrator and Operator-level users can issue this command.
System 3ffe::1
Used to display the Switch's current IPv6 route.
show ipv6route <ipv6networkaddr>
This command will display the Switch's current IPv6 route.
<ipv6networkaddr> - This option will display the IPv6 route address.
None.
System 3ffe::1
Page | 342