D-Link DGS-3700 Series Reference Manual page 75

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5# show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address
------ ------------------
1 00-35-26-00-11-99
1 00-35-26-00-11-91
3 00-35-26-00-11-90
Total Entries: 3
DGS-3700-12:5#
reconfig
Purpose Used to connect to a member switch, through the commander switch, using Telnet.
Syntax reconfig [member_id <value 1-32> | exit]
Description This command is used to reconnect to a member switch using Telnet.
member_id <value 1-32> − Select the ID number of the member switch to configure.
Parameters
exit – This command is used to exit from managing the member switch and will return
Only Administrator and Operator-level users can issue this command.
Restrictions
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
DGS-3700-12:5#reconfig member_id 2
Command: reconfig member_id 2
DGS-3700-12:5#
Login:
config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id
Description This command is used to add candidates and delete members from the SIM group by ID
add <candidate_id> <password> − Use this parameter to change a candidate switch
Parameters
delete <member_id 1-32> − Use this parameter to delete a member switch of a SIM
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To add a member:
Role
---------
Commander
Member
Candidate
to managing the commander switch.
1-32>]
number.
(CaS) to a member switch (MS) of a SIM group. The CaS may be defined by its ID
number and a password (if necessary).
group. The member switch should be defined by ID number.
Page | 75