D-Link DGS-3700 Series Reference Manual page 388

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example usage:
To disable 802.1X on the Switch:
DGS-3700-12:5#disable 802.1x
Command: disable 802.1x
Success.
DGS-3700-12:5#
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create user "test":
DGS-3700-12:5#create 802.1x user test
Command: create 802.1x user test
Enter a case-sensitive new password:
Enter the new password again for confirmation:
Success.
DGS-3700-12:5#
delete 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete user "test":
DGS-3700-12:5#delete 802.1x user test
Command: delete 802.1x user test
Success.
DGS-3700-12:5#
show 802.1x user
Purpose
Syntax
Description
Parameters
This command is used to create an 802.1X local user.
create 802.1x user <username 15>
This command is used to create an 802.1X user.
username − Specifies adding user name
Only Administrator-level users can issue this command.
This command is used to delete an 802.1X local user.
delete 802.1x user <username 15>
This command is used to delete a specified user.
username − Specifies deleting user name
Only Administrator-level users can issue this command.
This command is used to show the 802.1X local user.
show 802.1x user
This command is used to display the 802.1X local user account information.
None.
Page | 388