Table of Contents
Advertisement
A.3.6
DF-31 Document Finisher
A.3.7
CA-31 Casters and CA-31B Caster Kit
Caution
Note
This multipurpose device is used for organizing printouts. The device can staple printed sheets
by electronic means and provides three output trays for stacking printed sheets after dividing
and staggering them according to print jobs.
The document finisher is attached to the left side of the printer as shown below. Use the
supplied dedicated bracket to attach the document finisher to the printer,
Figure A-13
These casters are mounted at the bottom of the bottom feeder for moving or fixing the printer.
The CA-31 is the regular casters that may be used for the standalone FS-8000C, including only
the standard PF-30A paper feeder or PD-30 duplex unit. The CA-31B is the topple-resistant,
heavy-duty caster kit. The CA-31B must be installed when the printer is installed with one or
more extra paper feeders.
The manufacturer is not liable for any damages or injuries that may be caused when the
CA-31B is not used to support the printer having more than one paper feeders.
If the floor is delicate against casters, when this product is moved after installation, the
floor material may be damaged.
CA-31
Figure A-14
CA-31B
A-11
DF-31 Document Finisher
Advertisement
Table of Contents
