Selecting The Paper Feed Source - Kyocera Mita FS-C5016N Operation Manual

3.10.6 Selecting the Paper Feed Source

You can select the paper source using the operator panel, from which the printer feeds paper
as the default. If an optional paper feeder(s) is installed, it is also available for the default
paper source.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the key.
4
Press the or
>Feed Select
Cassette 1
5
To change the current paper feed source, press the ENTER key. A blinking question
mark (?) appears.
>Feed Select
? Cassette 1
6
Press the or
toggles through the following paper feed sources, depending on the installed optional
paper feeders (from the top most paper cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassettes 2, 3 and 4 are available for selection when the optional paper feeders
are installed.
7
When the desired paper source displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
key repeatedly until Paper Handling > appears.
key repeatedly until >Feed Select appears.
key to display the desired paper feed source. The message display
3-77
3.10 Paper Handling