Table of Contents
Advertisement
Chapter 2 Operating the Page Printer
Adjusting the Print Density
Setting the Audio Warning (Buzzer)
2-62
If necessary, the print density can be adjusted from the Mode Select Menu. The required print density
can be selected from five different steps (01 – 05). The factory setting is 03, and there is normally no
need to alter this setting.
When using the KIR 2 function, please use the " 03" setting. For details on adjusting the KIR 2 mode,
see page 2-58.
In addition to the message displayed when the paper supply is exhausted, or when paper jamming
occurs, an audio warning is made to sound. This is useful, for example, when the printer is in a
location some distance from the user.
The audio alarm is set to On when leaving the factory. The buzzer will sound according to the type of
printer error as given in the following table.
The buzzer does not sound if the buzzer setting is set to Off.
Advertisement
Table of Contents
