To Protect Operations With A Security Code - Sony RCP-1500 Operation Manual

[Page Permission]
When
Page Permission
View
Full Lock
Mode
Full Paint
The following settings can be configured.
[Full Lock]
: Press this to light the button and prohibit
all operations of the control panel.
[View Mode]
: Press this to light the button and prohibit
all operations of the control panel except for viewing
data.
[Full Paint]
: Under the default settings, all operations
of the control panel are prohibited except for
custom paint menu operations. Press this to light
the button and permit all other operations of the
control panel.
[Item Permission]
When
Item Permission
Ref File Lens File
Enable Enable
Crop Knee Max
Enable Enable
The following settings can be configured.
[Ref File Enable]
permit the setting of the reference files of the
control panel.
[Lens File Enable]
permit the setting of the lens files of the control
panel.
[OHB File Enable]
permit the setting of the OHB files of the control
panel.
[Crop Enable]
: Press this to light the button and
permit the setting of 16:9 t 4:3 Crop of the control
panel.
[Knee Max Enable]
permit the knee max function.
[3D Menu Enable]
permit 3D System and CCU 3D Monitor
configuration of the control panel. Light [3D Menu
Enable] when using the HDFA-200 and configuring
the 3D system.
3
[Exit]
Press when the settings are finished.
The Security screen reappears.
4
[Engineer Mode]
Press
42
Settings
is pressed:
Exit
is pressed:
Exit
OHB File
Enable
3D Menu
Enable
: Press this to light the button and
: Press this to light the button and
: Press this to light the button and
: Press this to light the button and
: Press this to light the button and
to cancel engineer mode.

To protect operations with a security code

To prevent unwanted operations, you can protect operation of
the control panel with a security code.
To enable security code protection
Under the default settings, the security code is disabled. Use
the following procedure to enable the security code.
1
For RCP-1500/1501, turn on the control panel while
holding down the PARA, MASTER, and CUSTOM
PAINT buttons.
For RCP-1530, turn on the control panel while holding
down the PANEL ACTIVE, IRIS/MB ACTIVE, and PAINT
buttons.
RCP-1500/1501
RCP-1530
Holding down
Holding down