Signal Color Correction; Adjusting Color By Temperature; Adjusting Color Values Based On Gamma Function; Selecting The Output Color Adjustment - Christie Boxer 4K30 User Manual

2. Adjust the value of the primary color you selected by using more or less of it in relation to the
other primary colors.
3. To confirm your selection, select Enter.
4. Repeat steps 2 and 3 for each primary color.

Signal color correction

Adjust the video signal color as required.

Adjusting color by temperature

Adjust the color temperature as expressed in degrees Kelvin.
1. Select MENU > Image Settings > Color & Gamma.
2. Select Color Temperature.
3. Adjust the slider to change the light to warmer or cooler and select Enter.

Adjusting color values based on gamma function

Use the gamma function options to adjust the color values of the inputted signal to give you a more
detailed picture.
1. Select MENU > Image Settings > Color & Gamma > Gamma Function.
2. Select the appropriate option:
• sRGB
• ITU-R BT-1886
• Power Law Function
• M-Series (Standard)
3. Select Enter.

Selecting the output color adjustment

Select the output color adjustment most suited to the input signal.
1. Select MENU > Image Settings > Color & Gamma > Select Color Adjustment.
2. Select the adjustment most suited to the input signal:
• Max Drives—Turn off all color adjustments, allowing the projector to run at maximum
brightness.
• Color Temperature—Specify a color temperature between 3200 and 9300, expressed in
degrees of Kelvin.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Adjusting the image
20