Using Channels To Set Input Signal Parameters - Christie CineLife+ RGB PLF Installation And Setup Manual

Using channels to set
input signal parameters
Channels store customized projector settings for different video input signal parameters.
The following describes only those parameters associated with input signal selection that should be
configured by the user.
Additional parameter settings are required to fully describe a channel setup. Refer to CineLife+ RGB PLF
User Guide (P/N: 020-103073-XX) for further information.
To create a new channel or edit the input video signal parameters for an existing channel, follow these
steps.
1. In the left navigation menu, select Channel Setup.
2. Select + Add Channel to create a new channel or, in the left panel, select a channel name to
select it for editing.
3. To define the input video signal parameters for the channel, complete the following fields.
Field name
Name
Input Type
Data Format
CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB
020-103072-04 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
The channel name
Select the input signal sources from one of the following.
• HDMI Input 1
• HDMI Input 2
• IMB
• IMB HDMI
(Available only if the selected IMB device supports HDMI selection from
projector UI.)
• IMB SDI
(Available only if the selected IMB device supports SDI selection from
projector UI.)
• SDI - 1
• SDI - 2
• SDI - 3
• SDI - 4
• SDI - Dual-Input (1,2)
• SDI - Dual-Input (3,4)
• SDI - Quad
The default is AUTO.
58