Adjusting the color space
Determine how the color components are decoded for accurate color in the display.
1. Select Menu > Image Settings > Color Space.
2. If projector does not detect the correct input signal while Auto is enabled, disable Auto by
selecting ENTER to select color space manually.
3. To match up with the input signal, select appropriate color space:
•
Auto
•
RGB
•
RGB Full
•
RGB Limited
•
YUV
•
REC709
•
REC601
4. To confirm the selection, select ENTER.
Adjusting the image sharpness
Adjust the edge clarity of the image.
1. Select Menu > Image Settings > Detail.
2. Select the sharpness:
•
Maximum
•
High
•
Normal
•
Low
•
Minimum
3. To confirm the selection, select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
36