10A-3 Cruise Control System:
Cancel Conditions of Cruise Control System
Constant cruising is cancelled under the following
conditions.
• *Ignition switch is turned OFF.
• MAIN switch is turned OFF.
• Vehicle speed becomes lower than minimum
operating speed (40 km/h (25 mile/h)).
• *Vehicle speed varies beyond cancel speed range (–
10 km/h (–6 mile/h)) from preset speed.
• *Brake pedal is depressed. (Brake light switch is
turned ON).
Input / Output Diagram
Input
Cruise control switch
MAIN switch
RES/ACC switch
SET/COAST switch
CANCEL switch
CPP switch
(M/T model)
Stop (brake) lamp switch
Transmission range switch
(
or
range signal)
"P", "R"
"N"
(A/T model)
Wheel speed sensor
(vehicle speed signal)
ABS hydraulic unit /
control module
• *Clutch pedal is depressed (Clutch pedal position
S5JB0AA101003
switch is turned ON) (For M/T vehicle).
• *Selector lever is shifted to "P", "R" or "N" range.
• *CANCEL switch is turned ON.
NOTE
When constant cruising is cancelled under
any condition with * (asterisk), vehicle speed
before cancellation can be resumed by
operating RES/ACC switch, provided that
vehicle speed is higher than 40 km/h (25 mile/
h).
ECM
S5JB0AA101004
Output
Electric throttle body
(throttle valve control)
Combination meter
(Indicator lamp control)
TCM (Shift control)
I5JB0AA10002-04