Mass Air Flow (Maf) And Intake Air Temperature (Iat) Sensor Removal And Installation - Suzuki WagonR+ RB310 Service Manual

1
(a)
Mass air flow (MAF) and intake air temperature (IAT)
sensor removal and installation
CAUTION:
• Do not disassemble MAF and IAT sensor.
• Do not expose MAF and IAT sensor to any shock.
• Do not cleansing MAF and IAT sensor.
• If MAF and IAT sensor has been dropped, it should be
replaced.
• Do not below compressed air by using air gun or the
like.
• Do not put finger or any other object into MAF and IAT
sensor. Malfunction may occur.
Removal
1) Disconnect negative cable at battery.
2) Disconnect MAF and IAT sensor coupler (1).
2
3) Remove MAF and IAT sensor (2) from air cleaner assembly.
Installation
Reverse removal procedure noting the followings.
• Tighten MAF and IAT sensor screws to specified torque.
Tightening torque
MAF sensor screw (a): 2.5 N·m (0.25 kg-m, 1.8 lb-ft)
• Connect MAF and IAT sensor coupler securely.
ENGINE AND EMISSION CONTROL SYSTEM (M13 ENGINE) 6E2-39