NEC Univerge SV8100 Features And Specifications Manual page 649

UNIVERGE SV8100
Program
Program Name
Number
14-06-01 Trunk Group Routing – Priority
Order Number
20-06-01 Class of Service for Extensions
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
21-01-12 System Options for Outgoing
Calls – Dial E911 Routing
Without Trunk Access
21-01-13 System Options for Outgoing
Calls – Alarm Ring Timer (E911)
21-02-01 Trunk Group Routing for
Extensions
E911 Compatibility
Description/Comments
Set the priority order number 1~4.
Assign a Class of Service to an
extension (1~15).
Turn Off or On an extension ability
to display the name and number of
the extension that dialed 911.
If Enabled (1), an extension user
can dial 911 without first dialing a
trunk access code or pressing a
line key. If Disabled (0), an
extension user must dial a trunk
access code (e.g., 9) or press a
line key before dialing 911. If
enabled, dialing 9+911 still dials
#
out.
Set the duration of the E911 Alarm
Ring Time. If set to 0, the E911
Alarm does not ring.
Assign the routes set in Program
14-06 to extensions. This program
and Program 14-06 are the
minimum required if E911 must
seize a line to dial.
Assigned Data
1
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Trunk Access Code
Required
1 = Trunk Access Code
Not Required
(default = 1)
0~64800 (seconds)
(default = 0)
1~100 (Trunk Groups)
0~100

(0 = No Setting)
(default = 1)
Issue 12.0
Level
2 3




2 - 619