Changing Settings - Siemens SINAMICS G120 Operating Instructions Manual

8.8.3.4

Changing settings

Procedure
To start commissioning the safety functions, proceed as follows:
1. Go online with STARTER.
2. In STARTER, select the fail-safe functions.
3. Select "Change settings".
Parameter
p0010 = 95
p9761
p9762
p9763
4. Selecting "STO via terminal":
You have completed the following commissioning steps:
● You have started to commission the safety functions.
● You have selected the basic functions via onboard terminals of the inverter.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Description
Drive commissioning parameter filter
Safety Integrated commissioning
Enter a password (factory setting 0000 hex)
Permissible passwords lie in the range 1 ... FFFF FFFF.
New password
Confirm password
8.8 Safe Torque Off (STO) safety function
Setting functions
305