Technical Data, Pm340; General Data, Pm340, 1 Ac 200 - Siemens SINAMICS G120 Operating Instructions Manual

Inverter with the cu250s-2 control unit (vector)
Hide thumbs Also See for SINAMICS G120:
Table of Contents

Advertisement

Technical data
12.2 Technical data, Power Modules
12.2.5

Technical data, PM340

12.2.5.1
General data, PM340, 1 AC 200 ... 240 V
Feature
Input voltage
Output voltage
Input frequency
Output frequency
Power factor λ
Starting current
Pulse frequency (factory
setting)
Electromagnetic
compatibility
Braking methods
Degree of protection
Operating temperature
Storage temperature
Contamination
Relative humidity
Environmental requirements Protected against damaging chemical substances according to environmental class 3C2 to
Shock and vibration
Installation altitude
Standards
408
Version
1 AC 200 ... 240 V
0 V 3-ph. AC ... input voltage x 0.95 (max.)
47 Hz ... 63 Hz
0 ... 650 Hz, depending on the control mode
1 AC 200 ... 240 V
Less than the input current
4 kHz
The pulse frequency can be increased in 2 kHz steps. An increase in the
pulse frequency results in a lower output current.
The devices comply with EN 61800-3: 2004 are suitable for Category C2 environments.
Details, see Catalog D 31.
DC braking, compound braking, dynamic braking with integrated braking chopper
IP20 chassis units as supplied from the factory.
IP00 after removing the terminal cover.
Without power reduction:
HO without power reduction:
-40 °C ... +70 °C
Protected according to pollution degree 2 to EN 61800-5-1: 2007
< 95% - condensation not permissible
EN 60721-3-3; 1995
Long-term storage in the transport packaging according to Class 1M2 to EN 60721-3-1:
1997
Transport in the transport packaging according to Class 2M3 to EN 60721-3-2: 1997
Vibration during operation according to Class 3M2 to EN 60721-3-3: 1995
without power reduction:
with power reduction:
UL, cUL, CE
The drive only satisfies the UL requirements when UL-certified fuses are used.
0.45 ... 0.7
0 °C ... +40 °C
>+40 °C ... +55 °C
up to 1000 m above sea level
up to 4000 m above sea level
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Details, see
Catalog D 31
Details, see Catalog D 31.
Details, see Catalog D 31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents