Siemens SINAMICS G120 Operating Instructions Manual page 442

Appendix
A.8 Application Examples
8. Select your subnet.
9. Using the hardware catalog, first insert the inverter using drag & drop.
10.Insert the communication telegram.
11.Open the properties window of the inverter and enter a unique and descriptive device
name for the inverter.
Using the device name, the PROFINET controller assigns the IP address when starting
up.
12.You will also find the proposed IP address in this screen form. If required, you can
change the IP address via "Properties".
13.Save your hardware configuration with "Save and compile" (
14.Load the configuration into the control unit via the
15.Enter the IP address of the controller.
442
If you do not have the IP address readily available, you can display the participants that
can be reached by clicking the "Display" button. Select the control from the list of
accessible participants, and exit the screen form with OK.
button.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
).