3. ... 10. In the "Encoder data" screen form, adapt the settings corresponding to the data
You have adapted the encoder data.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
sheet of your encoder.
The "Details" tab is used for application-specific settings, e.g. to invert the encoder signal.
The fine resolution can be separately set for the process data Gx_XIST1 and Gx_XIST2.
2 bit fine resolution is practical for square wave encoders. Typically, sin/cos encoders
have an 11 bit fine resolution.
Appendix
A.8 Application Examples
437