Backing up data and series commissioning
9.1 Saving settings on a memory card
9.1.3
Safely remove the memory card
NOTICE
Destruction of files on the memory card when the memory card is removed
If you remove the memory card when the converter is switched on without implementing the
"safe removal" function you may destroy the file system on the memory card. The memory
card will then no longer function.
Only remove the memory card using the "safe removal" function.
Procedure
To safely remove the memory card using STARTER, proceed as follows:
1. In the Drive Navigatorselect the following screen form:
2. Click on the button to safely remove the memory card.
3. You may remove the memory card from the inverter after the appropriate message has
been output.
You have now safely removed the memory card using STARTER.
330
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB