Siemens SINAMICS G120 Operating Instructions Manual page 357

Changing the encoder data
Procedure
To change the encoder data, proceed as follows:
1. From the navigation bar, open the screen form "Control_Unit/Configuration".
2. Select the "Configuration" tab.
3. Select the "Encoder data" button.
4. Change the encoder data.
You have changed the encoder data.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Corrective maintenance
10.8 Replacing an encoder
357