Siemens SINAMICS G120 Operating Instructions Manual page 391

Definitions
• LO input current
• LO output current
• LO power
• HO input current
• HO output current
• HO power
If the power data comprise rated values without any further specifications they always refer
to an overload capability corresponding to Low Overload.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
100 % of the permissible input current for a load cycle according to
Low Overload (LO base load input current).
100 % of the permissible output current for a load cycle according
to Low Overload (LO base load output current).
Power of the inverter for LO output current.
100 % of the permissible input current for a load cycle according to
High Overload (HO base load input current).
100 % of the permissible output current for a load cycle according
to High Overload (HO base load output current).
Power of the inverter for HO output current.
Technical data
12.2 Technical data, Power Modules
391