Description; Identifying The Converter - Siemens SINAMICS G120 Operating Instructions Manual

Description

3.1

Identifying the converter

Main components of the converter
Each SINAMICS G120 converter comprises a
Control Unit and Power Module.
• The Control Unit controls and monitors the
• The Power Modules are available for motors
The following data is provided on the Power Module type plate (
● Designation:
● Technical data:
● Order number:
● Version:
The following data can be found on the Control Unit type plate (
● Designation:
● Order number:
● Version:
Additional converter components
The following components are available so that you can adapt the converter to different
applications and ambient conditions:
● Line filter (Page 29)
● Line reactor (Page 30)
● Output reactor (Page 32)
● Sine-wave filter (Page 34)
● Braking resistor (Page 36)
● Brake Relay to control a motor holding brake (Page 37).
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Power Module and the connected motor.
with a power range of between 0.37 kW and
250 kW.
e.g. Power Module 240
Voltage, current and power
e.g. 6SL3224-0BE13-7UA0
e.g. A02
e.g. CU250S-2 DP Control Unit
e.g. 6SL3246-0BA22-1PA0
e.g. 02 (hardware) 4.6 (firmware)
①
):
②
):
3
23