Does The Motor Match The Converter - Siemens SINAMICS G120 Operating Instructions Manual

5.2.2

Does the motor match the converter?

The converter is preset on a motor at the factory as shown in the figure below.
Figure 5-3
The rated current of the motor must be in the range 13% to 100% of the rated converter
current.
Example: With a converter with the rated current 10.2 A, you may operate induction motors
whose rated currents are in the range 1.3 A to 10.2 A.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Motor data factory settings
Commissioning
5.2 Preparing for commissioning
77