Siemens SINAMICS G120 Operating Instructions Manual page 143

Displaying
Display value
Power output at the motor shaft
Power factor
Balance from the energy drawn and fed back
Interconnectable display of the PROFIenergy state
Energy saved - with respect to the adjustable
characteristic (p3320 ... p3329)
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Configuring the fieldbus
7.5 PROFIenergy profile for PROFINET
in the inverter in the PROFIenergy profile
r0032 in kW ID 34 in W
r0038 ID166
r0039[1], in kWh ID 200 in Wh
r5613 ---
r0041 ---
143