Installing Reactors, Filters And Braking Resistors - Siemens SINAMICS G120 Operating Instructions Manual

4.2

Installing reactors, filters and braking resistors

Installing reactors, filters and braking resistors
The installation of reactors, filters and braking resistors is described in the documentation
provided. See also Section: Additional information on the inverter (Page 461).
Installing base components
Reactors, filters and braking resistors are available as base components for the PM240 and
PM250 Power Modules, frame sizes FSA, FSB and FSC. You can also install base
components next to Power Modules.
Figure 4-1
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Permissible combination of base components
4.2 Installing reactors, filters and braking resistors
Installing
41