s
Product information
Order numbers for memory cards and licenses
Supplement to Operating Instructions 06/2013, FW V4.6, Section 3.2 Control Units
The Control Unit provides software functions that have to be enabled through licenses.
You can purchase the software as a license without memory card if you are already using
one of the memory cards listed below for operating your inverter. If you do not already use
a memory card, purchase the license on a memory card. The inverter also uses an
inserted license card as a memory card for saving settings.
Please find below a list of the memory cards and licenses available.
Memory cards
Empty memory card
XX designates the firmware version: 4.6 ≙ EG, 4.7 ≙ EH, 4.8 ≙ EI ...
Memory card with firmware
Licenses
License for
Basic Positioner with Vector control
Extended safety functions with
•
Safely Limited Speed (SLS)
•
Safe Direction (SDI)
•
Safe Speed Monitoring (SSM)
•
Basic Positioner with Vector control
•
Extended safety functions
6SL3054-4AG00-2AA0
6SL3054-7XX00-2BA0
Without memory card
6SL3074-7AA04-0AA0
6SL3074-0AA10-0AA0
SINAMICS G120
Inverter with the
CU250S-2 Control Unit
(Vector)
Order number for the license
With memory card
6SL3054-4AG00-2AA0-Z E01
6SL3054-4AG00-2AA0-Z F01
6SL3054-4AG00-2AA0-Z E01 F01
08/2013