Overview Of Control Units - Siemens SINAMICS G120 Operating Instructions Manual

Description

3.2 Overview of Control Units

3.2 Overview of Control Units
The Control Units CU250S-2 differ with regard to the type of fieldbus.
Memory cards
The following memory cards are available for the Control Unit as medium to backup inverter
settings:
● Card without firmware: Order No. 6SL3054-4AG00-2AA0.
● Card with firmware: Order No. 6SL3054-7Ex00-2BA0.
The digit at position x designates the firmware version:
4.6 ≙ EG, 4.7 ≙ EH, 4.8 ≙ EI ...
Licenses
You require a license to enable several inverter functions:
● License for the following extended safety functions with speed monitoring:
– Safe Stop 1 (SS1)
– Safely Limited Speed (SLS)
– Safe Direction (SDI)
– Safe Speed Monitor (SSM)
Order number: 6SL3074-0AA10-0AA0.
● License for the "Basic positioner" function
Order number: 6SL3074-7AA04-0AA0.
The license is supplied on a memory card. To operate the inverter, the card with the license
must be inserted. The license key is saved in a non-volatile fashion on the card; it cannot be
transferred to other cards
The inverter uses an inserted license card also as memory card to back its settings.
24
Designation
CU250S-2
CU250S-2 DP
CU250S-2 PN
CU250S-2 CAN
Order number
6SL3246-0BA22-1BA0
6SL3246-0BA22-1PA0
6SL3246-0BA22-1FA0
6SL3246-0BA22-1CA0
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Fieldbus
USS, Modbus RTU
PROFIBUS DP
PROFINET IO
EtherNet/IP
CANopen