Activating Licensed Functions; Licensing - Siemens SINAMICS G120 Operating Instructions Manual

A.2

Activating licensed functions

A.2.1

Licensing

How do I activate a licensed function?
Procedure, case 1: Recommended
1. Order a memory card - with or without firmware - with the license that you require as Z
2. Insert the card in the switched off inverter.
3. Switch the inverter on.
You have activated the function.
Procedure, case 2
Precondition: You have one of the following memory cards
● 6SL3054-4AG00-2AA0:
● 6SL3054-7EG00-2BA0:
1. Order the license for the function that you require.
2. You receive the "Certificate of License", it contains:
3. Create the license key (Page 414) using the "WEB License Manager".
4. Insert the card into the inverter.
5. Write the license key to the card using STARTER or BOP-2. See Writing the license key
6. Switch the inverter off and on again.
You have activated the function.
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
option.
Positions "EG" in the second block correspond to the firmware version of your device
4.6 ≙ EG, 4.7 ≙ EH, 4.8 ≙ EI ...
– the software order number
– the license number
– the delivery note number
to the card (Page 417).
card without firmware
card with firmware
A.2 Activating licensed functions
Appendix
413