Guide Through This Manual - Siemens SINAMICS G120 Operating Instructions Manual

Introduction

2.2 Guide through this manual

2.2 Guide through this manual
In this manual, you will find background information on your inverter, as well as a full
description of the commissioning procedure:
22
①
Here you will find information about the
hardware of your inverter and the
commissioning tools:
• Description (Page 23)
②
• Overview of the inverter installation
(Page 40)
All information relating to the commissioning of
your inverter is located in the following
chapters:
③
• Commissioning (Page 73)
• Adapt terminal strip (Page 95)
• Configuring the fieldbus (Page 111)
• Setting functions (Page 215)
④
• Backing up data and series commissioning
(Page 323)
⑤
Information regarding the maintenance and
diagnostics of your inverter is located in the
following chapters:
• Corrective maintenance (Page 343)
• Alarms, faults and system messages
(Page 365)
⑥
The most important technical data for your
inverter is located in this chapter:
• Technical data (Page 385)
⑦
The appendix contains some background
information and explanatory examples:
• Appendix (Page 411)
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB