Creating Or Displaying The License Key - Siemens SINAMICS G120 Operating Instructions Manual

Appendix
A.2 Activating licensed functions
A.2.2

Creating or displaying the license key

In order to create a license key for a new license – or to display which licenses are saved on
a card, use the, "WEB License Manager" (http://www.siemens.com/automation/license
(https://workplace.automation.siemens.com/pls/swl-
pub/SWL_MAIN_MENU.NAVIGATION_HEAD?a_lang_id=E&a_action=)).
Creating license keys using "WEB License Manager"
Precondition
● You have opened the License Manager (http://www.siemens.com/automation/license
(https://workplace.automation.siemens.com/pls/swl-
pub/SWL_MAIN_MENU.NAVIGATION_HEAD?a_lang_id=E&a_action=)).
● You have the license number and the delivery note number from the Certificate of
License as well as the serial number of your memory card.
● You know the product family of your inverter. In your particular case, "SINAMICS G120".
Using the License Manager you create the license key in the steps shown in the following
diagram.
You can identify in which step you presently are based on the green square (progress
display).
Procedure
Proceed as follows to create a License Key:
1. In the License Manager click on "Direct access" in the navigation bar.
The progress identifier is at "Login".
2. Enter the license number and delivery note number from your Certificate of License. Then
click "Next".
The progress indicator is then at "Identify product".
3. Enter the serial number of the memory card and select SINAMICS G120 for "Product".
Then click on "Next".
If licenses are already assigned to your software, then they are displayed here. The
progress indicator still remains at "Identify product".
Then click again on "Next".
4. You can now see the licenses that you can assign. The progress indicator is at "Select
licenses".
Set the check mark to Assign and click on "Next"
414
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB